TRACK LOADER TX-420 DINGO

Manufacturer: TORO
Model: TX-420
4 Hour: $225
Daily: $310
Dingo TX 420 Compact Utility Loader
Dingo TX 420 Compact Utility Loader
The Dingo TX 420 is designed with workers in mind. All of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately! This power can be used to run over 35 Toro Dingo attachments. Its walk-behind operator position provides 360° of visibility and outstanding operator mobility. When you step up to the Toro Dingo TX Compact Utility Loader, you can almost feel the power!

  • 20 hp Kohler® engine
  • 34.5" Wide
  • Versatile
  • Turf Friendliness
FEATURES

4-Pump Hydraulic System - 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!

Air-Cooled Gasoline Engine - A 20 hp Kohler® engine provides the necessary power to drive Toro's 35+ attachments.

Simple Controls - You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.

Compact Size - Narrow enough so you can bring hydraulic power easily into 42" access points; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.

Exclusive Track Drive - Kevlar reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.
* Prices are subject to change. Tax and other fees not shown in above price estimate.
  • Model: TX 420 Kohler Command ProSeries 20 hp
  • Overall Width: 33.7 in (86 cm)
  • Engine Make: Kohler
  • Gross Power: 20 hp (15 kw)
  • Hydraulic Reservoir: 10.6 gal (40 l)
  • Pump Flow: 11.2 gal/min (42 l/min)
  • Relief Valve Pressure: 3000 psi
  • Operating Load: 500.5 lbs (227 kg)
  • Tip Capacity: 1479.4 lbs (671 kg)
  • Track Width: 5.9"
  • Wheel base: 31.1" (79 cm)
  • Ground Clearance: 4.6" (11.7 cm)
  • Overall Length: 92" (233.7 cm) w/ bucket | 70.7" (180 cm) w/o bucket
  • Overall Height: 46.1" (117.1 cm)
  • Maximum Operating Height: 90.1" (229 cm)
  • Hinge Pin Height: 65.8" (167.1 cm)
  • Dump Height: 46.1" (117.1 cm)
  • Dump Angle: 38°
  • Reach: 21.8" (55.4 cm) fully raised
PDF Version Toro TX420 Specifications

Brand

TORO