Genie Z-80/60 Articulated Boom Lift – With outreach that’s second to none, the Genie Z-80/60 articulating boom lift delivers outstanding lifting versatility with up, out and over positioning capabilities ideal for outdoor construction and industrial applications. Ideal for outdoor construction and industrial applications the Genie Z-80/60 engine-powered articulating boom lift provides lifting versatility with a combination of up, out and over positioning capabilities and outreach that’s second to none. Four-wheel drive with full-time positive traction handles rough ground conditions to enhance the smoothness of the ride. The full time active oscillating axle on the Z-80/60 lift increases wheel contact on irregular terrain. Featuring 360˚ continuous rotation turntables for fast, easy positioning. The platform also hydraulically rotates a full 160˚ and stays level throughout the entire range of motion.
- Genie® Fast Mast™ system lowers the platform to the ground without having to lower the secondary boom; raises primary and secondary booms simultaneously.
- Full-time positive traction and full-time 4WD for a smooth ride on rough ground conditions.
- Reverse-articulating secondary boom with 29 ft (8.83 m) of up and over reach and zero front arm swing.
- Quiet diesel engine options for increased performance, gradeability and terrainability
- Max Working Height: 84 ft
- Platform Height Maximum: 78ft
- Max Horizontal Reach: 60 ft
- Max Up and Over Clearance (riser extended):
- Below Ground Reach: 15 ft 10 in
- Lift capacity: 500 lb
- Platform rotation: 160°
- Vertical jib rotation: 135°
- Turntable rotation: 360° continuous
- Turntable tailswing – riser up: 3 ft 10 in
- Turntable tailswing – riser down: 7 ft 4 in
- Drive speed – stowed: 3.0 mph
- Drive speed – raised**: 0.68 mph
- Lift speed to full height: 76 sec
- Gradeability – 2WD – stowed***: 30%
- Gradeability – 4WD – stowed***: 45%
- Tilt sensor activation:
front to back 4.5° and side to side: 4.5°
- Turning radius – 2WS inside: 14 ft 6 in
- Turning radius – 2WS outside: 24 ft 6 in
- Turning radius – 4WS inside: 7 ft
- Turning radius – 4WS outside: 15 ft
- Controls: 12 V DC proportional