CONCRETE GRIND-GAS 5.5HP DUAL HEAD

Manufacturer: EDCO
Model: 2GC6-H
4 Hour: $64
Daily: $64
Product Enquiry

Description

EDCO Classic Style Concrete Floor Grinders are versatile machines that preform a wide variety of surface preparation applications. The classic dual floor grinder is ideal for production grinding and floor cleaning on large or small surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas.

FEATURES

  • 22″ working width will grind approximately 400-500 sq.ft. per hour at 1/32″ with EDCO Dyma-Serts
  • Gas, electric & propane power options available
  • Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
  • 2″ Vacuum port and water port
  • Counter-rotating discs prevent machine from pulling side to side and give operator greater control
  • 6 grinding accessories required per loading
  • Electric, Gasoline and Propane models available

SPECIFICATIONS

  • Part #: 51800
  • Power: Gasoline
  • **Horse Power: 5.5 HP
  • *RPM: 562
  • Length: 47″
  • Width: 27″
  • Height: 38.5″
  • Weight: 197 lbs
  • Belts: Std “V” Belts
EDCO Classic Style Concrete Floor Grinder

EDCO Classic Style Concrete Floor Grinder

PDF Version Edco 2GC Parts Manual
PDF Version Edco 2GC Operators Manual

Attachment Types for Single Head Grinders

Attachment Grind Concrete Floors Roughen Concrete Floors Remove Thinset Clean Concrete Floors Remove Material Build-Up Remove Floor Epoxies Remove Floor Paint Remove Floor Urethane Grind Asphalt Surface
Grinding Stones Preferred Method Application Limited Performance Limited Performance Acceptable Performance Limited Performance Limited Performance Limited Performance Limited Performance Preferred Method Application
Diamond Pins Preferred Method Application Limited Performance Limited Performance Preferred Method Application Limited Performance Preferred Method Application Preferred Method Application Preferred Method Application Preferred Method Application
Scarifiers Limited Performance Acceptable Performance Acceptable Performance Limited Performance Limited Performance Limited Performance Limited Performance Preferred Method Application
Diamond Segment System Preferred Method Application Limited Performance Limited Performance Preferred Method Application Limited Performance Preferred Method Application Preferred Method Application Preferred Method Application Preferred Method Application

  • GRINDING STONES
     
    Grinding Stones

    Grinding Stones

    The C06 and C10 is a coarse grade and one of the most popular, providing the maximum material removal rates. They are utilized for general grinding and the removal of trowel marks, high spots and rough sections on concrete surfaces. The average service life is approximately: 4 to 10 hours. The C24 is a medium grade stone that will result in lower material removal rates. It is utilized for finer finish grinding of concrete and rough grinding on terrazzo and other types of stone floors. The average service life is approximately: 6 to 10 hours.

    The C80 is a fine grade stone that will result in still lower material removal rates. It is utilized for polishing concrete and medium grinding on terrazzo and other tyes of stone floors with a water/slurry mixture only. The average service life is approximately: 8 to 20 hours. The C120 is a super fine grade stone that will result in still lower material removal rates. It is utilized for final polishing of concrete and medium grinding on terrazzo and other types of stone floors with a water/slurry mixture only. The average service life is approximately: 40 to 75 hours.

    Material: Silicon carbide as the abrasive medium and a clay binder as the matrix
    Application: Remove up to 1/8 inch material thickness. The larger the number, the finer the grain structure and usually, the smoother the resulting finish.
    Finish: Coarse to super fine grades available
    Hints: C10 stone most popular. Water and slurry minimizes clogging. Do not use to remove any thickness of paints, adhesives, epoxies, etc., because of clogging characteristics similar to sandpaper
    Service Life: Up to 5000 square feet
    Dimensions: 2 inch x 2 inch x 4 inch


  • DIAMOND PINS – DIAM-A-TACH® 
    Grind or Polish Concrete Diamond Pin 100 to 120 grit, red identification color, stamped “R” on pin shank. Use to remove fine swirl marks and normal grinding patterns from concrete and similar type surfaces prior to applying sealers, stains or preparing for diamond polishing. Usually preceded by the use of the SG24-2104 DIAM-A-TACH Grinding Block. 2.4 square inches nominal surface area per block. 0.45 inch nominal segment thickness. Includes SG24-1800 wedge, each.
    Grind or Polish Concrete Diamond Pin 30 to 40 grit, white identification color, stamped “W” on pin shank. General purpose, Omnitrix™ matrix formula delivers balanced productivity rates versus service life for both cured and green concrete, epoxies, urethanes and other, high abrasive-type materials. Usually preceded by the use of the SG24-2105 DIAM-A-TACH Grinding Block.  2.4 square inches nominal surface area per block. 0.45 inch nominal segment thickness. Includes SG24-1800 wedge, each.
    Grind or Polish Concrete Diamond Pin 40 to 50 grit, silver identification color, stamped “S” on pin shank. For removing rough swirl marks and normal grinding patterns from concrete and similar type surfaces prior to applying sealers, stains or preparing for diamond polishing. 2.4 square inches nominal surface area per block. Usually preceded by the use of the SG24-2106 DIAM-A-TACH Grinding Block. 0.45 inch nominal segment thickness. Includes SG24-1800 wedge, each.
    Material:Industry standard diamonds
    Application: Removal of thin layers of materials without clogging, including adhesives, epoxies, urethanes, paints and concrete
    Hints:Segments are directionally marked to increase diamond tail service life. Normal segment wear: .015 inch per 8 hour day.  Use wet or dry
    Finish: Sanded finish to a polished finished
    Service Life: Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
    Dimensions: 2 inch x 2 inch x 4 inch.

  • DIAMOND SEGMENT SYSTEM
    Diamond Segment System

    Diamond Segment System

    The SG24-2300 DIAM-A-TACH® Diamond Segment Grinding System offers an innovative solution for a wide variety of surface preparation job applications. The Omnitrix™ formulation allows the same matrix to be used on green concrete, high tensile epoxies, thin-film type floor coverings and fully cured concrete. Delivers balanced material removal rates and service life. This unique feature simplifies the proper matrix selection process and minimizes inventory stocking levels.

    The rectangular-shaped, diamond segments have significantly greater thickness when compared to competitive products. Delivers substantially longer service life and higher ROI. The housing is directional marked for proper orientation to eliminate the top layer of tails from being inadvertently removed. Secures tight with a plastic wedge. Use the SG24-2300 DIAM-A-TACH® Grinding System with General SG12 and SG24 Series Surface Grinders and popular models of competitive single and dual head surface grinders.

    Material: Industry standard diamonds
    Application: Removal of thin layers of materials without clogging, including adhesives, epoxies, urethanes, paints and concrete
    Hints: Units are directionally marked to increase diamond tail service life. Normal segment wear: .015 inch per 8 hour day. Single matrix formulation for simplicity. Greater diamond segment thickness. Low acquisition cost. Use wet or dry
    Finish: Sanded finish to a polished finished
    Service Life: Up to 50,000 square feet. (up to 15 time longer than carbide grinding stones)
    Dimensions: 5-5/8” (143 mm) L x 2-1/4” (57 mm) W x 2-1/4” (57 mm) H
    Number of Segments per Unit: 4
    Segment Grit: 30/40
    Nominal Segment dimensions: 2” (52 mm) L x .400” (10 mm) W x .450” (11 mm) H
    Grinding Area per Unit: 3.2 in² (520 mm²)
    Weight, each: 2-1/4 lbs (1 kg)


  • SCARIFIERS
    Grinder Scarifier

    Grinder Scarifier

    Available in carbide tipped 5 point flails for aggressive chipping action. Also, available in multi-point hardened steel flails for a fine finish or for breaking up hardened deposits of foreign matter or concrete floors.

    Material: Carbided tipped or hardened steel
    Application: Roughen on concrete floors or remove hardened deposits on floors
    Hints: Not recommended for soft or “gummy” deposits
    Finish: Very rough finish to no effect to concrete cap
    Dimensions: 2 inch x 2 inch x 4 inch

* Prices are subject to change. Tax and other fees not shown in above price estimate.