Carlton Model SP5014TRXE 34 HP Gas Vanguard Engine With Carlton Razor Cutting System (Includes Freight FOB Tampa) – 10-12 weeks lead time.
SP5014 TRX SERIES – 35 HP Vanguard Big Block 993 CC Track-Mounted – The new SP5014TRX couples the industry’s best hydraulic controlled self-propelled grinder with the versatility of a rubber track undercarriage. The SP5014TRX offers two engine options: 27 HP Kohler and 35 HP Vanguard. The SP5014TRX is also available with lever controls, wired remote control, or wireless remote control. The SP5014TRX uses a rubber high track system that incorporates multiple idler rollers and spring tensioning to keep the track at optimal efficiency for running and tracking characteristics. This track system provides high floatation to minimize ground pressure and disturbance while providing a stable grinding platform and go anywhere traction.
- Large Cutter Wheel, 21-inch diameter & 1 1/4-inch thick, provides maximum cutting power and flywheel momentum.
- A Variety of Powerful Engines
- Feather Touch Hydraulic Controls make the SP5014TRX easy to operate and provide optimum user control.
- Tapered Roller Bearings on jack shaft and cutter wheel provide long service life and reduced maintenance.
- Proprietary Rubber Track Undercarriage – provides positive climbing power over the roughest terrain.
- Spring Tensioned Track – Keeps the tracks on the rollers and allows for easy adjustment.
- High Track Sprocket – Keeps the track drive sprocket out of debris. Keeps more drive teeth engaged than competitors.
- More Track Rollers than the competition – keeps the track in place across rough terrain.
- Weight: 2215 pounds
- Dimensions: 95″L x 56″ H x 35″ Narrow 48″ Wide W
- Track Type: Rubber track
- Track Foot Print: 7″
- Track Ground Pressure: 4 PSI
- Track Length: 42″
- Controls: Side Mounted – Optional Remote
- Brakes: Ground Speed Controlled by Hydraulics
- Fenders: Bolt on 1/4 inch plate
- Fuel Capacity: 10 Gallons
- Battery: 650 Cold Cranking Amps
- Curb Clearance: 13 Inches
- Cutter Wheel Diameter: 21 Inches with Teeth
- Cutter Wheel Thickness: 1 1/4 Inch – Blanchard Ground
- Cutter Wheel RPM: 1350 Nominal
- Below Ground: 14 Inches
- Hydraulic System: 34 Inches
- Width of Cut: 50 Inch Arc
Vanguard Series 540000 V-Twin
- Number of Cylinders: Two
- Bore Type: Cast Iron Sleeve
- Valves: Overhead
- Bore: 3.4 Inches (85.5 mm)
- Stroke: 3.4 Inches (85.5 mm)
- Displacement: 60 Cubic Inches (993 cc)
- Maximum RPM: 8.25:1
- Horsepower: 3600
- Peak Torque: 35
- Weight: 52 Ft* Lbs @ 2,400 RPM
- Oil Capacity w/Filter: 125 Lbs. (56.8 KG)
- Cooling Medium: 77.8 oz
- Air Cleaner: Air
- Oil Filter:
Dry Type Canister with Safety Element
- Lubrication: Spin On
Full Pressure w/Full Flow Filter 12 Volt