ICS 695XL-gc12 Chain Saw

CHAIN SAW CONCRETE 695XL-GC12

Manufacturer: ICS
Model: 695XL-GC12
4 Hour: $86
Daily: $106
Product Enquiry
Category:

Description

695XL Gas Power Cutter for Concrete & Pipe Deepest, Most Versatile Gas Power Cutter

The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 12-inch (30 cm) – 16-inch (40cm) guidebars and the entire line of FORCE3, FORCE4 and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors and concrete professionals.

FEATURES

  • Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more
  • Most versatile gas-power cutter
  • New piston and cylinder lowers engine temperature
  • Longer life muffler with reinforced internal baffle
  • Easy-to-start with higher energy ignition system
  • New easy-to-tune carburetor

SPECIFICATIONS

  • Engine Type: 2-Stroke, Air Cooled
  • Displacement: 94cc (5.7 cu-in)
  • Horsepower: 4.8kW (6.4 hp) @ 9000 rpm
  • Torque: 5.7 Nm (50.4 in-lbs) @ 7200 rpm
  • Engine Speed:
    9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
  • Chain Speed at Maximum Power:
    28 m/s (5500 ft /min)
  • Weight: 9.5 kg (21 lbs) power head only
  • Dimensions: 18″ L x 14″ H x 12″ W
  • Starter: Recoil, dust and water resistant
  • Ignition: Special water resistant electronic ignition
  • Fuel ratio: 2% (50:1) gasoline-to-oil
  • Fuel Capacity: 1 liter (0.26 gallon)
  • Water Supply Requirement Minimum:
    1.5 bar (20 psi)
  • Water Flow Requirement Minimum: 4 lpm (1 gpm)
  • Guaranteed Sound Power Level:
    Lwa (1) 115 dB(A); (Kwa=1.0 dB(A))
  • Equivalent Sound Pressure @ Operator’s Ear: Lwa 104.6 dB(A) (K=1.0 dB(A))
  • Vibration, ahv eq Concrete Cutting (2):
    3.6 m/s2 (K=1.0 m/s2) Front Handle
    3.1 m/s2 (K=1.0 m/s2) Rear Handle
  • Vibration, ahv eq Pipe Cutting (2):
    5.62 m/s (K=0.2 m/s2) Front Handle
    5.28 m/s2 (K=0.2 m/s2) Rear Handle
* Prices are subject to change. Tax and other fees not shown in above price estimate.