Description
Gehl Compact Track Loaders are bursting with power and ready take on any challenge that approaches. These versatile machines excel in almost any environment.
- New high-powered, Tier III EPA-certified emissions compliant engines meet stringent emissions standards while delivering exceptional performance
- New standard foot throttle in all models increases the ability for operators to multi-task
- New control handle design with added switch controls places the operationof the machine at the operator’s finger-tips
- Ground speeds up to 7.5 mph in high speed – Power speed/transport speed
- Float control function easily activated by a push-button does not require continuous button activation
- New lifting points added for overhead hoisting
- Optional factory or field installed Hydraulic
ENGINE
- Make: Yanmar
- Model: 4TNV98
- Aspiration: Natural Aspirated
- Displacement (L)/cylinder: 202.5 cu.in. (3.3)/4
- Power @ rpm: 67 hp @ 2500
- Maximum Torque @ rpm: 181ft.-lbs @ 1600
DIMENSIONS AND WEIGHTS
- Operating Weight: 8,014 lbs
- Lift Height to bucket pin: 119.3 in
- Dump Height: 93.4 in
- Reach @ Maximum lift: 28.8 in
- Dump angle: 37 degrees
- Bucket rollback @ground level: 35 degrees
- Length – without bucket: 109 in
- Length – with bucket: 140 in
- Ground clearance:12.1 in
- Angle of departure: 26 degreees
- Height to top of ROPS: 84 in
- Width – without bucket: 62.2 in
- Overall width – with bucket: 70 in
- Rear Clearance Radius: 61 in
- Front Clearance Radius w/ bucket: 93 in
CAPACITIES
- Fuel: 19.8 gal
- Hydraulic reservoir: 10.2 gal
- Engine oil: 10.8 qts
- Engine coolant: 17.4 qts
PERFORMANCE
- Tipping Capacity – ISO 14397: 4630 lbs
- Rated Operating Load – ISO 14397:
- @ 50% of tipping capacity – 2315 lbs
- @ 35% of tipping capacity – 1620 lbs
- Breakout Forces:
- Bucket: 6724 lbs / Lift arm: 6709 lbs
ELECTRICAL
- Battery / CCA: 12-volt / 600
- Alternator – amp: 40
UNDERCARRIAGE
- Traction Pump / Drive: Piston / Planetary
- Traction braking: Hydraulic – SAHR
- Drawbar pull: 9118 lbf
- Roller type/Track rollers (ea side): Steel / 4
- Track width: 12.6 in
- Track contact length: 55 in
- Ground pressure: 4.86 psi
- Travel Speeds:
- Low: 0 – 4.5 mph / High: 0 – 6.8 mph
HYDRAULIC SYSTEM
- Operating pressure: 2988 psi
- Auxiliary Hydraulic flow – std.: 18.4 gpm

GEHL CTL65 Compact Track Loader
![]() |
GEHL CTL65 Specifications |
![]() |
GEHL CTL65 Parts Manual |
![]() |
GEHL CTL65 Operators Manual |
* Prices are subject to change. Tax and other fees not shown in above price estimate.