GEHL CTL65 Loader

TRACK LOADER, GEHL CTL/65

Manufacturer: GEHL
Model: CTL/65
4 Hour: $250
Daily: $288
Product Enquiry

Product Description

Gehl Compact Track Loaders are bursting with power and ready take on any challenge that approaches. These versatile machines excel in almost any environment.

  • New high-powered, Tier III EPA-certified emissions compliant engines meet stringent emissions standards while delivering exceptional performance
  • New standard foot throttle in all models increases the ability for operators to multi-task
  • New control handle design with added switch controls places the operationof the machine at the operator’s finger-tips
  • Ground speeds up to 7.5 mph in high speed – Power speed/transport speed
  • Float control function easily activated by a push-button does not require continuous button activation
  • New lifting points added for overhead hoisting
  • Optional factory or field installed Hydraulic

ENGINE

  • Make: Yanmar
  • Model: 4TNV98
  • Aspiration: Natural Aspirated
  • Displacement (L)/cylinder: 202.5 cu.in. (3.3)/4
  • Power(kW) @ rpm: 67 hp (50) @ 2500
  • Maximum Torque(Nm) @ rpm: 181ft.-lbs. (244) @ 1600

DIMENSIONS AND WEIGHTS

  • Operating Weight – lbs. (kg): 8,014 (3635)
  • Lift Height to bucket pin – in. (mm): 119.3 (3030)
  • Dump Height – in. (mm): 4 (2370)
  • Reach @ Maximum lift – in. (mm): 8 (730)
  • Dump angle – degrees: 37
  • Bucket rollback @ground level – degrees: 35
  • Length – without bucket – in. (mm): 109 (2756)
  • Length – with bucket – in. (mm): 140 (3543)
  • Ground clearance – in. (mm):1 (310)
  • Angle of departure – degrees: 26
  • Height to top of ROPS – in. (mm): 84 (2123)
  • Width – without bucket – in. (mm):2 (1580)
  • Overall width – with bucket – in. (mm): 70 (1778)
  • Rear Clearance Radius – in. (mm): 61 (1549)
  • Front Clearance Radius w/ bucket – in. (mm): 93 (2362)

PERFORMANCE

  • Tipping Capacity – ISO 14397 – lbs. (kg): 4630 (2100)
  • Rated Operating Load – ISO 14397 – lbs. (kg)
    • @ 50% of tipping capacity 2315 (1050)
    • @ 35% of tipping capacity 1620 (735)
  • Breakout Forces – lbf. (kN)
    • Bucket: 6724 (30)
    • Lift arm: 6709 (29.8)

ELECTRICAL

  • Battery / CCA: 12-volt / 600
  • Alternator – amp: 40

UNDERCARRIAGE

  • Traction Pump / Traction Drive: Piston / Planetary
  • Traction braking: Hydraulic – SAHR
  • Drawbar pull – lbf. (kN): 9118 (40.5)
  • Roller type/Track rollers – each side: Steel / 4
  • Track width – in. (mm): 6 (320)
  • Track contact length – in. (mm): 55 (1389)
  • Ground pressure – psi (kg/cm2): 86 (0.34)
  • Travel Speeds – mph (km/h)
    • Low: 0 – 4.5 (0 – 7.3)
    • High: 0 – 6.8 (0 – 10.9)

HYDRAULIC SYSTEM

  • Operating pressure – psi (bar): 2988 (206)
  • Auxiliary Hydraulic flow – std. – gpm (L/min): 4 (69.5)

CAPACITIES

  • Fuel – gal. (L):8 (75)
  • Hydraulic reservoir – gal. (L): 2 (38.6)
  • Engine oil – qts. (L): 8 (10.2)
  • Engine coolant – qts. (L): 4 (16.5)